Salicylic Acid

No, this is a raw cosmetic ingredient that should not be applied directly on the skin. It must be properly diluted and formulated into skincare products before use to avoid irritation.

Store salicylic acid in a cool, dry place away from moisture, heat, and direct sunlight. Keep the container tightly closed after use to maintain its quality and stability.

Salicylic acid is commonly used to make skincare and personal care products like face cleansers, toners, serums, spot treatments, body washes, and scalp care formulations for dandruff and oily skin concerns.

No, it is not safe to add salicylic acid powder directly to your bath powder.

To compound salicylic acid into a 5% solution for a peel, you'll need to follow these steps:

1. Calculate the Amount Needed:

   • Determine the total volume of solution you want to make. For example, if you want to make 100 ml of 5% salicylic acid solution, you'll need to calculate 5% of 100 ml, which equals 5 ml of salicylic acid.

2. Weigh Salicylic Acid:

   • Using a digital scale, measure out the appropriate amount of salicylic acid powder needed to achieve the desired concentration. In this case, measure out 5 grams of salicylic acid powder.

3. Prepare a Solvent:

   • Choose a suitable solvent to dissolve the salicylic acid. Common solvents include distilled water, ethanol (alcohol), or propylene glycol. Ensure the solvent is of high purity and suitable for the intended use.

4. Combine Salicylic Acid and Solvent:

   • Add the measured amount of salicylic acid powder to a clean and dry container. Slowly add the chosen solvent while stirring continuously to dissolve the salicylic acid completely. Use a stirring rod or spoon to ensure thorough mixing.

5. Ensure Homogeneity:

   • Continue stirring until the salicylic acid is fully dissolved in the solvent and the solution appears clear and homogeneous. It may take some time for the salicylic acid to dissolve completely, especially if using water as the solvent.

6. Adjust Volume if Necessary:

   • If the total volume of the solution is less than the desired amount, add additional solvent (e.g., distilled water or ethanol) to achieve the desired final volume. Stir well to ensure homogeneity.

7. Label and Store:

   • Once the solution is prepared, transfer it to a clean, sterilized container with a tight-fitting lid. Label the container with the concentration of the solution, the date of preparation, and any other relevant information. Store the solution in a cool, dry place away from direct sunlight.

8. Perform a Patch Test:

   • Before applying the solution to the skin, perform a patch test on a small area to check for any adverse reactions or sensitivities. Wait 24 hours and monitor for any signs of irritation before proceeding with a full peel application.