Inspired by the viral Neweaura Bubble Candle Pack, these trendy 3D cube candles are the ultimate high-margin decorative pieces for Diwali and the festive season! This fully scalable formulation uses a robust blend of VedaOils' smooth-burning Soy Wax Slab and structural Yellow Beeswax to ensure the intricate bubble details pop out of the silicone mold flawlessly without breaking. Infused with our traditional Sandalwood Fragrance Oil and vibrantly tinted with Yellow Candle Color, these modern aesthetic candles combine traditional festive scents with contemporary design. Packaged in sets of four, this easy B2B project guarantees premium, retail-ready home decor your customers will rush to buy for gifting and styling!

• Skill Level: Beginner
• Time: 1 hour
• Yield: 4 Bubble Candles

Equipment & Tools

• Pouring Pitcher or Heat-Safe Container
• Double Boiler
• Thermometer
• Stirring Utensils
• Skewer
• Clothespins

Instructions

1. Prep & Wick the Mold: Carefully use a skewer to pierce a tiny hole through the bottom center of your 3D Bubble Candle Silicone Mould. Thread a Pre-Waxed Candle Wick through the hole from the inside out pulling it taut. Seal the outside hole with a bit of mold putty to prevent leaks and secure the top of the wick with a clothespin.
2. Melt the Wax Matrix: In your heat-safe pouring pitcher combine 300g of Soy Wax Slab chunks and 100g of Yellow Beeswax Pellets. Place the pitcher in a double boiler on low heat until the waxes are completely melted and reach approximately 185° F.
3. Color & Scent: Remove the melted wax from the heat. Add a small pinch of Yellow Candle Color and stir gently until completely dissolved yielding a vibrant festive hue. Once the wax cools slightly to 175° F slowly stir in 20ml of Sandalwood Fragrance Oil ensuring the oils bind perfectly with the wax matrix.
4. Pour & Cure: When the wax cools to about 160° F carefully pour it into the prepared bubble mold. Let the candle cool undisturbed at room temperature for at least 6 to 8 hours.
5. Demold & Retail: Once completely hardened gently peel back the flexible silicone mold to reveal the intricate 3D bubble design. Trim the wick to a quarter inch. Repeat the process to create a set of four package them in a premium gift box and your high-margin festive decor is ready for retail!

Notes

Safety Warning: Never leave melting wax unattended! Always monitor your double boiler.

Pro Tip: A pure soy wax candle can be too soft to hold the intricate 3D bubble shape so blending it with beeswax is crucial for creating structurally sound freestanding pillar candles that unmold perfectly.