YOUR SHOPPING CART

cart empty

Flat 10% OFF Code: Summer | Free Shipping Above ₹999 in India | We Ship Globally

How To Clean Candle Making Equipments After Making Candles

Making candles is a lot of fun. You've got the aromas of warm wax combined with your favorite scent. There's nothing else quite like it. Regrettably, there is a catch: you will have to clean up your equipment later. Cleaning candle-making equipment, on the other hand, doesn't have to be difficult because it's mostly a matter of making the wax fluid once more and sweeping it away.

Candle Making Equipment

You may be able to freeze the wax and chisel it away simply. Today, we'll show you how to swiftly and efficiently clean candle supplies mainly waxes from candle making equipment so that your favorite hobby or operating model no longer feels like a job and instead feels magical. First, let's speak about how to clean your candle-making tools.

Cleaning Candle Making Equipments - Step By Step

Cleaning the molds or melting pot that you pour your wax from and into is one of the first things to think about when cleaning your candle-making equipment. Thankfully, it's not that tough; all you have to do is use heat to render your wax more malleable, then use alcohol and paper towels to remove it. Let's see what happens.

How To Clean Candle Wax Melting Pot?

Candle Wax Melting Pot Cleaning

Step 1: If you just completed pouring all of your candles, the remaining wax could still be liquid. It's a good idea to reheat it if it's not hot enough. However, if necessary, you can reheat the candles to make them liquid again.

Step 2: Simply wipe the area dry with a handful of paper towels once it has become liquid. Candle wax is quite hot, so proceed with caution.

Step 3: Spray little wiping ethanol on a new paper napkin and wipe it clean to eliminate the residue.

Step 4: Repeat the technique 2-3 times if necessary to obtain a clean and hygienic piece of equipment.

How To Clean Candle Wax Aluminium Molds?

Aluminium Molds Cleaning

Step 1: Preheat the microwave to the lowest temperature it can go, like 60 to 75 degrees Celsius. Use a temperature of 75 degrees Celsius or below.

Step 2: Cover the surface of the cookie sheet with two layers of paper towel. It's best if the paper towel is thick and absorbent.

Step 3: Place the aluminium mold open end down on the cookie sheet. Make sure the molds aren't contacting each other.

Step 4: Preheat the oven to 150°F and bake the candle molds for 15 minutes, or until the wax begins to melt. Take them out of the oven.

Step 5: Using an oven mitt, potholder, or thick towel, hold one mold at a time. On the other hand, use paper towels to wipe away the melted wax. Make sure your skin doesn't come into contact with the hot metal mold.

Step 6: Allow the mold to cool. Wait until the molds are totally cool before stacking them. If they are stacked while still warm, they may stick together.

How To Clean Silicone Candle Molds?

Silicone Candle Molds Cleaning

Step 1: Fill the sink halfway with hot water and add enough dish soap to make the water sudsy. To soften the wax, use the water as hot as your hands can bear.

Step 2: Place the molds in a sink filled with water and soak them until the wax softens. Waiting too long will cause the water to cool too quickly, causing the wax to re-harden.

Step 3: Wipe clean each mold with the washcloth while wearing rubber gloves to remove the softened wax. Candles can be used to make cleaning easier.

Safety Tips To Clean Candle Making Equipments

candle making safety
  • Ensure you have potholders available to handle hot pans and other items.
  • When warming the wax into your vessels, wear safety goggles to avoid getting wax in your eyes.
  • Wear suitable attire while removing reheated wax to avoid being burned by the hot wax, which is as scorching as oil.
  • Make sure you have an extinguisher on hand. When you use liquid to put out a candle-making fire, your hot wax may spill. This is due to the fact that heated wax acts similarly to hot oil.
  • Keep a first-aid kit on hand if you need to treat an injury.

Conclusion

We've discussed how to cleanse your candle-making equipment today, and we're delighted to tell you that it's not that tough. Simply heat your equipment until the wax is liquid, then dampen most of the mess using paper towels. What you can't get rid of with towels alone can be eliminated with rubbing alcohol and elbow grease. It can save you a lot of time and make cleaning a lot easier.

You May Also Like: